close icon

Litematica Mod 1.13.2 -> 1.17

355

Average rating: 0

Litematica is a mod allowing the management of schematics (kind of hologram of structures) in Minecraft. It was developed to take over from the very famous Schematica, the one that has not been updated since 2018, and to work with the latest versions of Minecraft. For this, the author takes advantage of the Fabric API and the MaLiLib library, which allows him to update the mod quickly and is already available for versions 1.13.2, 1.14.4, and 1.15. Minecraft 2, 1.16.5, and 1.17.

  • The main feature of a schematic mod is to display a “hologram” version of a structure, which helps in building it and on where to place the blocks. It also includes an overlay function (configurable) to highlight missing, extra or misplaced blocks.
  • Litematica also includes a large list of materials, including a list of HUD materials, to help you collect the materials needed to build a structure.
  • There is also a function schematic verification ( Schematic Verifier ) comprising an overlay that you can use to scan the entire schematic area and look for potential errors. This can be extremely useful, especially with technical builds or with redstone, where a small mistake can break everything.
  • There are also several helper features in Creative-only mode, such as Fill, Replace, Delete and also a Paste mode for ‘pasting’ patterns in the world (immediate / direct in single player, using the / setblock commands in multiplayer) .

Use and Controls

First, the main menu of Litematica opens by default with the key ,(comma) and the configuration GUI opens with , + C(unless you are for example on the QWERTY keyboard layout, then ,will be replaced by Mand , + Cwill become ). There is also a button to open the configuration GUI in the main menu. M + C

To create a new diagram:

    • Start with the Area Selection mode first , as this will make things easier / faster.
    • You can change the mode either with the button at the bottom left in the main menu of Litematica, or by holding the Ctrl key and scrolling with the mouse wheel while you hold the “tool piece”, which by default is a stick (it can be changed on the Generic Configuration GUI Tab ).
    • Now, if you only need one box, you can switch to Simple zone selection mode in the Litematica menu (it defaults to Normal mode ).
      • If you need multiple boxes (sub-regions), stay in Normal mode and create a new selection in the Area Selection Browser and make sure it is selected (highlighted in white) . It’s automatically selected when you create it, so don’t click it (once) or you deselect it.
      • Once you have the selection to use, you can left and right click while holding the “tool” to select the first and second corners respectively. You can sneak around by clicking to place the corner next to the block you’re pointing at, instead of the inside.
      • You can middle click to select a corner or sub-region area to work with in Normal mode. You can Alt + Scroll to move the currently selected corner or box.
      • It is often easier / faster to use Expand mode instead of Corners mode . You can switch between them with Ctrl + M or on the Generic Configuration tab . In Expand mode , you first right-click to move and reset the selection on the clicked block, then left-click on a block on the edges of your build, to expand the selection area around all these positions clicked.
      • In Normal mode , you can create and rename as many sub-region areas as you want in the Area Editor GUI (default keyboard shortcut to open which should be multiply by numeric keypad, or use the button in the main menu).
      • Once your selection is complete, you can use a keyboard shortcut to save it as a diagram, or use the button in the Area Editor GUI .
    • To work with loaded schemas:

      • To use the saved schema, you need to go to the main menu -> Load Schematics , leave the Create Placement checkbox enabled, select your schema and click Load .
      • It is useful to switch to Schematic Placement tool mode when working with the loaded diagram, as you can then use the “tool” to move and position the placement, by clicking or Alt + scroll .
      • To rotate or mirror it, you can go through the main menu -> Schematic Placement -> Configure , or use the numeric keyboard shortcut minus to open this placement configuration GUI.
      • Once the placement is in the right position, I recommend locking it to the placement configuration GUI so that you don’t accidentally move it.
      • So one thing to note here is that you can load a schema once and create any number of locations out of it (from the Load Schematics -> Create Placement menu ). So the placement is basically the data of position, rotation, etc. for a given “visible schematic copy”.
      • For example, to render only one layer at a time, you can change the rendering settings in the Render Layers configuration tab . There are also keyboard shortcuts to cycle through mode, move layer to player position, and move layer. By default, cycle keys are M + Page Up / Down , to move layer is M + Home and to move layer is Page Up / Down .
       

How to install a Minecraft mod?

Installation time of a Minecraft mod:  3 minutes.

Most mods require you to install Forge or Fabric to function properly. Forge and Fabric are, to put it simply, a platform that allows for easy installation and significant stability for mods.

  1. Download the mod you want to install

    You can download the mod you want to install from the site of your choice.

  2. Install the API needed to make the mod work

    Depending on the mod, you will need to install an API, the most common of which is Minecraft Forge .

  3. Select your API profile in the Minecraft launcher and launch the game

    When the API is installed, you need to launch Minecraft and select the API profile to upload the data to your game.

  4. Open your Mods folder

    To access the mods folder you have to go to the .minecraft folder. To access via Windows make Windows key + R and type % appdata%, then click the folder roaming and navigate to the folder .minecraft. On a Linux distribution , do ALT + F2 and type .minecraft. On Mac , your folder. minecraft can be found in User> Library> Application Support . If you can’t find Application Support , do Finder> Menu Bar: Go + Hold ALT> Library.

  5. Put your downloaded (mod) file in the Mods folder

    Just drag the mod file you downloaded into the Mods folder that is in .Minecraft.

  6. Run Minecraft and enjoy the mod!

    Launch Minecraft with the API profile and enjoy the new mod you just installed! Good game !

Download Litematica Mod 1.13.2 – > 1.17 

 

Rate:
Share:

Similar mods

138
0

Better UX Mod 1.18.1

Better User Experience replaces the majority of overlays that are displayed on the screen. It also adds more without compromising visible space. Fire no longer covers all the screen. Better...

888
379
0

Smart Moving Mod [1.12.2]

Version:
  • 1.6.4 / 1.7.2 / 1.7.10 / 1.8.9 / 1.12.2

The Smart Moving mod, developed by Divisor, is THE mod for Parkour enthusiasts in Minecraft. In addition to adding new beneficial moves, it also improves existing ones. You will have...

669
678
0

Storage Drawers Mod [1.7.10 -> 1.16.5]

Version:
  • 1.7.10 / 1.8.0 / 1.8.9 / 1.9.0 / 1.9.4 / 1.10.2 / 1.11.2 / 1.12.2-1.12.1-1.12 / 1.14.4 / 1.15.2 / 1.16.1 / 1.16.2 / 1.16.3 / 1.16.4 / 1.16.5

Easily organize and find the things you use most frequently. Storage Drawers borrows ideas from Jabba and Bibliocraft, making it a highly functional, compact, and aesthetic dedicated storage mod meant...

Leave comment

Please, leave comment

You didn't enter your name

Enter valid email

Leave comment

About - Privacy - Terms of Service
All files from 9Valheim.net can be downloaded for free. 9Valheim is not affiliated with Valheim or Steam in any way
2021 © 9valheim.net - All rights reserved.